Installation Steps - Vevor Bjs-25-Rd-01 Bedienungsanleitung

INSTALLATION STEPS

1．Bolt the fuselage to the base
and tighten with a wrench.
4. Align pins and holes in the
upper mold to lift it. Align the
lower mold with the slide slot
and push it to the center.
2. Rotate and fix the handle to
the machine.
5. Place the pins in the holes on
both sides of the slide rail.
4
3. Align the pins on the upper
mold with the slots on the body
and push the upper mold
upward to complete the
assembly of the upper mold.
6. Assembly is complete.