VEVOR BJS-25-RD-01 Bedienungsanleitung Seite 7

How to Replace Molds
1.When you want to replace the
mold, remove the pins on both
sides of the lower mold.
4. Align the pins on the upper
mold with the slots on the body
and push the upper mold
upward to complete the
assembly of the upper mold
7. Assembly is complete.
2. Align pins and holes in the
upper mold to lift it. Remove the
lower mold.
5. Align pins and holes in the
upper mold to lift it. Align the
lower mold with the slide slot
and push it to the center.
5
3. Remove the upper mold with
force.
6. Place the pins in the holes on
both sides of the slide rail.