Operating Determinations - EuroLite LED STRIP RGB DMX512 Bedienungsanleitung

3

OPERATING DETERMINATIONS

The controller serves for control of RGB LED strips requiring an operating
voltage between 12 V and 24 V direct current. The maximum power
consumption of a color must not exceed 4 A and of all LEDs connected 12 A.
The controller has 9 built-in programs (7 individual colors and 2 color
changing programs with adjustable speed) which can be adjusted via DIP
switches.
For DMX control of the LEDs the controller can also be connected to a DMX
lighting controller. The controller is equipped with 3 DMX channels for
brightness control of red, green and blue. For DMX and serial connection,
both XLR and RJ45 jacks are provided.
The controller requires an operating voltage between 12 V and 24 V direct
current. Matching power supply units are available as accessory. The unit
was designed for indoor use only.
The ambient temperature must always be between -5° C and +50° C. Keep
away from direct insulation (particularly in cars) and heaters. The relative
humidity must not exceed 100 % with an ambient temperature of 25° C. This
device must only be operated in an altitude between -20 and 2000 m over
NN.
Avoid brute for during installation. There should not be any cables lying
around. You endanger your own and the safety of others!
Please consider that unauthorized modifications on the device are forbidden
due to safety reasons! If this device will be operated in any way different to
the one described in this manual, the product may suffer damages and the
guarantee becomes void. Furthermore, any other operation may lead to
dangers like short-circuit, burns, electric shock, crash etc.
www.eurolite.de
14