Megasat HD 1 Kompakt Bedienungsanleitung Seite 36

2. Description and key assignment
6. TP (+/-)
7. SAT (+/-)
8. Status indicators
9. Power switch
10. USB port
06
Press the TP +/- buttons to switch between the
transponders of the currently selected satellite.
Press the SAT +/- buttons to switch between satel-
lites.
Note:
Press the (TP -) and (SAT -) buttons simulta-
neously to turn the beep on or off.
POWER Status display for the operation of the device.
(green = device is switched on and ready for operation)
13V
13 volt supply voltage for the LNB
(red = 13 V power supply from the device to the LNB)
18V
18 volt supply voltage for the LNB
(red = 18 V power supply from the device to the LNB)
22K
22 KHz status indicator
(red = Active 22 KHz switching to LNB „Highband")
LOCK
Status display satellite search
(green = device has found the selected satellite)
SHORT Short circuit status display
(red = suspected short circuit, please check connections,
cables and connections)
B.T
Bluetooth status display
(blue = active Bluetooth connection to the device)
Turns the unit on or off.
To connect an external power source such Powerbank
(4.8 - 6.0 Volt / max 10 Watt)
ENGLISH