Assembly & Installation - Vevor 2"-Drop6" Handbuch

ASSEMBLY & INSTALLATION
Step 1:
Insert into the Trailer Hitch Begin by installing the channel mount (#1) into
the trailer hitch receiver. Then, secure it with the hitch pin (#5).
Step 2:
Determine Required Ball Height Determine the proper ball height by
leveling the trailer and measuring from the bottom of the trailer tongue to
the ground. See below.
Find the hole closest to that measurement on the channel mount (#1). The
top pin of the dual-ball (#2) will go in that hole. Secure all security locks (#3)
and plug (#4) with the hitch pins (#5).
- 4 -