Step 4: Calf Emitter; Step 5: Connect The Calf Emitter; Step 6: Bench; Step 7: Wooden Grid - Masily Ruka Montage- Und Gebrauchsanleitung

Step 4: Calf emitter

After both side walls have been set up, you can start installing the calf emitter element. Align it with the
guides on the side walls and push it down. (Be careful not to scratch the side walls.)
The TOP sticker must point upwards during installation and the calf emitter must point outwards.

Step 5: Connect the calf emitter

Connect the cable of the calf emitter to the corresponding connection on the rear wall.

Step 6: Bench

Slide the seat onto the calf emitter element along the horizontal guides on the side walls.
Make sure that the BACK sticker is facing the rear wall of the cabin and not to scratch the side walls.

Step 7: Wooden grid

Screw the wooden grid directly in front of the emitters in the rear wall.