Dmx Protocol; Cleaning And Maintenance; Replacing The Fuse - EuroLite LED D-1000 Bedienungsanleitung

DMX Protocol

CH1 000 - 255
CH2 000 - 255
CH3 000 - 255
CH4
000 - 255
CH5
000 - 255
CH6 000 - 255
000 - 010
CH7
011 - 255
000 - 180
CH8
181 - 255
000 - 010
CH9 011 - 200
201 - 255
CH10 000 - 255

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Red (0 – 100 %)
Green (0 – 100 %)
Blue (0 – 100 %)
White (0 – 100 %)
Amber (0 – 100 %)
Pink (0 – 100 %)
No function
LED Strobe
Clockwise rotation
Counter-clockwise rotation
No function
Auto DMX (
Auto Program 1 in Stand Alone Mode)
Sound DMX (
Sound Program 1 in Stand Alone Mode)
Auto DMX / Sound DMX Speed
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
(increasing speed)
(increasing speed)
22/23 00086340, Version 1.0