Decoderwerk 50201 Benutzerhandbuch Seite 32

Configuratio
n
Dimming time
You can configure how long it takes for the
◆
signals to fade in and out.
If the signal is dimmed, a short pause is
◆
maintained between the signal images in
accordance with the prototype.
Outputs
Milliseconds
1 second corresponds to 1,000 milliseconds
◆
The default value of 50 means a dimming time of
◆
500ms, i.e. 0.5 seconds.
Example with dimming
Dimming time is 50
◆
The current signal is faded out for 500ms by a
◆
command at the control panel. After a short
pause, the new signal 500ms
faded in.
Example without dimming
Dimming time is 0
◆
A command at the control panel immediately
◆
fades out the current signal. The new signal is
displayed immediately without a pause.
There is no dimming.
◆
14