Decoderwerk 50201 Benutzerhandbuch Seite 28

Commissioning
The decoder has an output with 3 connections
◆
for the relay.
The middle connection is connected to
◆
either the red
depending on the command.
To solder the connection cables, you should
◆
remove the decoder from the track, as the
heat generated can damage the mounting pins
of the track.
Connect outputs
or green connection,
Performance
30V DC voltage
◆
30V alternating voltage
◆
2A current
◆
Memory
The relay is bistable and automatically retains the
last selected position.
Switches
The relay does not supply the
◆
connected loads with voltage.
The relay completely isolates the decoder from
◆
the connected load
10