Behavior After Power Restoration; Information About Radio Operation - eQ-3 MAX! Bedienungsanleitung

8. Behavior after power restoration

Note for operation with electric boiler/circulation
pump:
If the MAX! Plug Adapter is used in connection with an
electric boiler/circulation pump in auto mode and the po-
wer supply is disconnected, the device will change into
menu mode. You can change the mode via the MAX! Soft-
ware afterwards.

9. Information about radio operation

Radio transmission is performed on a non-exclusive
transmission path, which means that there is a possibility
of interference occurring. Interference can also be caused
by switching operations, electrical motors or defective
electrical devices.
The range of transmission within buildings can differ
greatly from that available in the open air. Besides the
transmitting power and the reception characteristics of the
receiver, environmental factors such as humidity in the vi-
cinity have an important role to play, as do on-site struc-
tural/screening conditions.
eQ-3 Entwicklung GmbH hereby declares that this de-
vice complies with the essential requirements and other
relevant regulations of Directive 1999/5/EC. You can find
the full declaration of conformity at www.eQ-3.de.
29