eQ-3 MAX! Bedienungsanleitung Seite 23

Separate room in the MAX! Software
• Plug in the MAX! Plug Adapter into a power socket.
• Plug in your electric radiator into the MAX! Plug Adapter.
• First, teach-in the MAX! Wall Thermostat to the Cube via
the MAX! Software. Therefore, activate the teach-in mode
of the MAX! Wall Thermostat. Press and hold down the
OK button for at least 3 seconds. Click on „New device"
in the MAX! Software.
• In the software, please add a new name to the MAX! Wall
Thermostat. Create a new room or add the MAX! Wall
Thermostat to an existing room afterwards.
• Now teach-in the MAX! Plug Adapter to the MAX! Cube
via the software. Therefore, press and hold down the
teach-in button (B) for at least 3 seconds. The device
LED (A) starts to flash. The teach-in time is 30 seconds.
23