eQ-3 MAX! Bedienungsanleitung Seite 27

• Click on „New device" in the MAX! Software.
• If teach-in has been successful, the device LED (A) starts
to flash for 1 sec. and the MAX! Plug Adapter will appear
in the software.
• Now add a name to the MAX! Plug Adapter in the software.
• Add a new room only for the MAX! Plug Adapter (e.g.
„Boiler") in the software. Only add the MAX! Plug Adap-
ter into the room and no other devices.
• The teach-in procedure has successfully been completed.
Via the MAX! Software, you can now switch the boiler/cir-
culation pump on and off and create individual time pro-
grammes.
You can also switch the boiler/circulation pump on
and off directly at the device by pressing the teach-
in button (B) shortly.
> 3 Sek.
27