Switching The Appliance On; Operating Tips; Setting The Temperature - Bosch GSV Serie Gebrauchsanleitung

en
Switching the
appliance on
Fig. 2
Switch on the appliance with the
On/Off button 1.
A warning signal sounds. The
temperature display 2 flashes.
Press the temperature selection
button 4. The warning signal switches
off.
When the freezer compartment has
reached the set temperature,
the temperature display 2 is lit.

Operating tips

When the appliance has been
■
switched on, it may take several hours
until the set temperatures have been
reached.
Do not put any food in the appliance
beforehand.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
26
Setting the
temperature
Fig. 2
Freezer compartment
The temperature can be set
from -16 °C to -26 °C.
Keep pressing temperature selection
button 4 until the required freezer
compartment temperature is set. The
value last selected is stored.
The set temperature is indicated on
display 2.
We recommend a factory setting of
-18 °C in the freezer compartment.