Audio Player; Setting Up A Bluetooth Connection; Remote Control - Omnitronic Rm-1422Fxa Benutzerhandbuch

Audio player

The amplifier features an audio player for MP3 files from USB storage devices and SD cards as well as
wireless music streaming from your Bluetooth devices such as smartphones, tablets and notebooks. Use the
"MODE" button to select the desired signal source. The audio player can either be operated via the buttons
on the front panel or via the remote control. The level is adjusted with channel 11/12.
Setting up a Bluetooth connection with mobile devices
Press the "MODE" button (repeatedly) until the display indicates "Bluetooth". The audio player will enter the
pairing mode. Now activate the Bluetooth function at the Bluetooth source and start the device scan. Select
"OMNITRONIC" from the list and connect the devices. Then play music at the Bluetooth source as you
normally would and the sound will come out of the speakers. You can operate the Bluetooth source with the
remote control, too.

Remote control

Button Function
Player on/off
MODE Switches between USB/SD/Bluetooth
Mute on/off
► Play/pause
Short actuation: previous/next title
/
Long actuation: fast rewind/forward
EQ Equalizer settings
VOL- / VOL+ Volume down/up
0-9 Direct title selection
SCN/RPT Random play and repeat functions
Before first operation, pull out the insulating foil on the back. To
change the battery, press the small latch with the notch to the
right and pull out the battery holder. Insert a button cell type
CR2025 into the holder with the positive pole facing upwards.
Remove the battery when not in use for a longer period of time.
22 • EN