Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DMX-Protokoll
Channel
Value
0-255
0-255
0-255
CH4
0-255
0-9
10-19
CH5
20-209
210-255
0
CH6
1-255
CH7*
0-255
0
1-239
CH8**
240-245
246-255
* Speed is not available in CH7 moce.
** The unlock / reset channel (CH8) is the seventh channel in 7CH mode.
Note: The functions in gray are for the LED Space ball 35, which must be purchased separately.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuse-holder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuse-holder.
Step 3: Install the new fuse in the fuse-holder.
Step 4: Replace the fuse-holder in the housing and fix it.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you need any spare parts, please use genuine parts.
Function
Red Dimmer
Green Dimmer
Blue Dimmer
Master Dimmer
Blackout
No function
Strobe, with increasing speed
No function
If CH8 = 0, then the lifting cable is secured
Lifting from the top to the bottom
Lifting speed, with decreasing speed (not available in 7CH-Mode)
If CH6 = 0, then the lifting cable is secured
Safety release
Before CH6 operation, the safety release should be activated; In
order to achieve the perfect effect, you must reset the unit twice:
Reset
once when the power is turned on; a second time at CH8 = (240-
Safety release
245).
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
26/27
00085268, Version 1.0
Werbung
Inhaltsverzeichnis
