EuroLite HST-150 Bedienungsanleitung Seite 20

Important!
Please do not operate the device before the payload is properly applied! The device must be reset twice to
the starting position before it can be put into operation.
Sufficient distance above
the ground must be taken
into account.
Installation
Step 1: Attach an
appropriate coupler onto the
HST-150.
Sufficient safety distance
must be considered during
installation.
Step 2: Hang the HST-150 to the truss.
Attach the coupler and the safety rope
properly.
Optional accessories (available separately)
Coupler XLR-Cable for DMX
20/27
Safety rope
Step 3: Attach the LED Space ball 35
on the HST-150.
00085268, Version 1.0