Climbing Technology ROLLNLOCK 2D652 Handbuch Seite 2

ROLLNLOCK
REQUEST FOR INSPECTION
CLIMBING TECHNOLOGY by ALUDESIGN S.p.A. via Torchio 22, 24034 - Cisano B.sco (BG) ITALY
Phone: +39 035 783595 / VAT code: 01893550168 / Fiscal code: 01605500139 / Website: www.climbingtechnology.com
®
Domestic: vendite@aludesign.it / Export: commerciale@aludesign.it / Training Center: infotraining@aludesign.it
OK!
NO!
For a better understanding of the procedure please have a look at the dedicated video:
https://youtu.be/9_REFm9DdxM
INSPECTION PROCEDURE
Place the device on a stable surface near an edge as shown.
Use one hand to hold the device by the connection hole. With the other
hand, rotate the cam outward and press down firmly with the palm.
Finally, release the cam.
If the cam returns to its original position, it means that the product is not
defective and can be used freely.
If the cam goes over the pin on the plate and remains stuck in that posi-
tion, it means that the product is defective: it can no longer be used under
any circumstances and it must be returned to the company.