Assembly; Preparation; Required Tools; Assembling The Bbq - tepro FLINT Bedienungsanleitung

– Do not set up the BBQ near entryways
or high-traffic zones.
– Always exercise extreme caution while
grilling. If distracted, you can lose
control of the device.
– Always be attentive and aware of what
you are doing. Do not use this product if
you are unfocussed or tired, or if you are
under the influence of drugs, alcohol,
or medications. Just one moment of
carelessness during use of the product
can lead to serious injuries.
Attention Risk of damage!
– Check the stability of the screws prior
to each use. If necessary, tighten all of
the screws again to ensure the BBQ is
standing securely.
Attention Risk of damage!
Downloaded from www.Manualslib.com
During use, the screws can
loosen slowly and impair the
BBQ's stability.
Do not use any strong or
grinding solvents or abrasive
pads, since these can attack
the surfaces and leave behind
scrape marks.
manuals search engine

Assembly

Preparation

Danger Risk of injury!
Failure to
instructions
problems and risks while using
the BBQ.
– Follow all of the assembly instructions
listed here.
1. First read through the assembly
instructions completely.
2. Allow yourself enough
assembly and find an even working
space of one to two square meters.
3. Small parts such as handles will
probably be preassembled.
4. Look out for sharp corners and wear
protective gloves for assembly.

required tools

1 x Phillips screwdriver
1 x Adjustable spanner

Assembling the BBQ

1. Attach the legs (2) to the fire pan (1)
with the long screws (7) and butterfly
nuts (8).
2. Screw the wind shield (3+4) together
at the top with a short screw (6) and
butterfly nut (8).
3. Insert the wind shield in the fire pan
(1) and screw them together with the
screws (6+7) and butterfly nuts (8).
t
follow these
can lead to
time for
16