Warranty - Kärcher HDS 2000 Super Betriebsanleitung

Display
Troubleshotting
Engine overload/overheat
–
 Turn device switch on "0" and let engine
cool off for min. 5 minutes.
 If malfunction still occurs, have device
checked by customer service.
Fuel indicator lamp glows
 Refill fuel.
 Check the function of the fuel level sen-
sor.
Indicator lamp liquid softener glows
 Refill liquid softener.
 Clean the electrodes in the liquid sof-
tener tank.
Indicator lamp for detergent glows
 Refill detergent.
Indicator lamp rotation direction
 Disconnect the main plug from the
socket.
 Rotate the pole reverser unit in the
mains plug by 180°.
 Insert the mains plug into the socket.
Device is not building up pressure
 If detergent tank is empty, refill.
 Set dosing value for detergent to "0".
 Ventilate the appliance, see "Operation/
Ventilating the System")
 Clean the filter in the water connection
and in both swimmer tanks.
 Check water supply level (refer to tech-
nical data).
 Check all supply lines to the high-pres-
sure pump for leaks or blockages.
28
lights up
Pump is vibrating
 Check all supply lines to the high pres-
sure pump as well as the detergent sys-
tem for leaks or blockages.
 Ventilate the appliance, see "Operation/
Ventilating the System")
Device is not sucking in detergent
 Clean the detergent suction hose with
filter.
 Clean the detergent metering valve.
 Remove the detergent suction hose on
the pump head and loosen the backflow
valve using a blunt object.
 Check all detergent suction hoses and
connections and ensure that they are
leak-proof.
 Check the detergent solenoid valves.
Burner does not start
 Refill fuel.
 Check the fuel pump.
 Clean sieve in front of the water short-
age safe guard.
 Change fuel filter.
 Clean the flame sensor of the electric
flame monitoring system.
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
– 12
EN

Warranty