Charging - Samsung POWERbot Benutzerhandbuch

Charging

It takes approximately 160 minutes to
completely charge when charging for the
first time after purchase and can be used for
approximately 30 minutes in Max mode.
Charging lamp during charging (green)
Turn on the
1
emergency switch
on the bottom
You must turn on the
emergency switch to turn on
POWERbot.
Manually charge
2
POWERbot by
placing it on the
charger
Make sure charge pins of
POWERbot and the charger is
aligned.
ENGLISH-10
Rated input voltage of this product
is 100 - 240 V~.
WARNING
Check the
3
charging status
"
according to charging
progress and "FULL" will
turn on when charging is
complete.
" will turn on