Information Codes; Checklist - Samsung POWERbot Benutzerhandbuch

Information codes

Below information
1
codes appear on
the display panel
Information codes
Turn off the
2
emergency switch
and check the below
instructions and take
appropriate action
The POWERbot is caught, stuck or trapped while
moving around.
Turn off the emergency switch and move the POWERbot to another
area.
Foreign matter caught in the Power brush.
Turn off the emergency switch and remove the foreign matter from the
Power brush.
Foreign matter caught in the left Driving wheel.
Turn off the emergency switch and remove the foreign matter from the
Driving wheel.
Foreign matter caught in the right Driving wheel.
Turn off the emergency switch and remove the foreign matter from the
Driving wheel.
Bumper sensor needs to be checked.
Turn off the emergency switch and turn it back on.
When information code does not disappear, check if there's any small
foreign matter between the bumper and the main body. If there is, pull
the bumper slightly and remove the foreign matter.
Foreign matter accumulated on the obstacle sensor.
Turn off the emergency switch and clean the front and rear sensor
with a soft cloth.
Foreign matter accumulated on the cliff sensor.
Turn off the emergency switch and clean the cliff sensor with a soft
cloth.
ENGLISH-30
Information code
3
will disappear
when you turn on
the emergency
switch

Checklist