Siemens PS791-2DC Betriebsanleitung Seite 37

Follow the steps below to remove the housing cover:
1. Remove the sealing caps from the housing cover (position
A in the figure above)
2. Loosen the screws in the cover (position B in the figure
above).
NOTICE
These screws remain in the cover after they have been
loosened (prevents them being lost). Never attempt to remove
these screws from the housing cover using force; otherwise
the housing cover will be damaged!
3. Remove the housing cover with the captive screws
(position C in the figure above).
Operating Instructions (compact) PS791-2AC / PS791-2DC
A5E01160517-06
English
37