MAJORITY D100X Bedienungsanleitung Seite 9

Basic Operations
EN
Changing the audio play mode
Press the 'Source' button on the remote control (Rem.22) repeatedly to change the
playing mode: BT-USB-AUDIO-PHONO-HDMI ARC-OPTICAL. Alternatively, press the
'Input/Volume' button (Ref.3) on the speaker repeatedly. A voice message will
announce each mode.
Adjust the Volume Level
Press the 'Volume +/–' buttons to adjust the volume- the POWER indicator will flash a
green light when doing so. To turn off the sound press the 'Mute' button on the
remote control (Rem.17). Press once again to resume to normal listening.
PLEASE NOTE: When increasing or decreasing the volume, each button press
generates a green LED light flash. When you reach the maximum volume level, the
green LED light will stop flashing.
If you adjust the volume to maximum and then power off, when you power on again,
the volume level will automatically be restored to the factory setting at a lower level.
Sound equalisers (only with remote use).
While in HDMI or Optical mode, you can use sound equalisers to enhance the sound
as per your preferences. Press and hold the 'Play/Pause' button (Ref.23) on
remote control for 4-5 seconds to select one of the equalisers named 'Level 1', 'Level
2' or 'Level 3'.
9