Optical & Phono Input - Majority D100X Bedienungsanleitung

Using the Optical Input, you can connect the Majority D100X with a TV/DVD/SET BOX,
outputs using an optical cable.​
•
Insert one end of the optical cable into the optical input port on the rear panel of the
main speaker (Ref.11) and the other end into your device optical output port.​
•
Press the 'Input/Volume' button on the main speaker (Ref.3) or the 'Source' button
on the remote control (Rem.22) repeatedly to change the speaker's mode to
'Optical'. A voice message will confirm you are using Optical Mode.​
•
Adjust the audio settings on your device, if required to Optical/Audio and PCM.
Using the Phono Input Port, You can connect the Majority D100X with a turntable using a
phono cable. Phono is designed exclusively for connection to a turntable that does not have a
built-in amplifier or preamplifier, and has an audio output of less than 100 RMS.
•
Insert the phono cable into the turntable/ record player and the other ends into the
phono port on the back of the main speaker (Ref.15). ​
•
Press the 'Input/Volume' button on the main speaker (Ref.3) or the 'Source' button
on the remote control (Rem.22) repeatedly to change the speaker's mode to
'PHONO'.​
•
Start playing audio from your turntable/record player via Majority D100X Speakers.
PLEASE NOTE that if your turntable has an output amplitude greater than 100 RMS, you may
experience distorted sound. In such cases, we recommend using the AUX input port or
Bluetooth mode on the speakers, instead of the PHONO input.
Optical & Phono Input
EN
13