Usb Port Usage - Majority D100X Bedienungsanleitung

USB Charging Port​
The USB port on Majority D100X, can be used as a charging port for phones or small
similar devices. Connect your phone using an USB cable (not included) and insert into
the speakers USB port (Ref.10).​
PLEASE NOTE: The output voltage of the USB port is 5V/1000mA, therefore not all
devices are guaranteed for charging using this port. Please check your device
specifications/manual before connecting with the speakers USB port for charging.​
A mobile phone can be charged while the speakers are in Standby or Operating Mode.
If the working mode is changed to Standby Mode, the phone will stop charging for 2
seconds and then continue charging.​
USB Playback Port​
The Majority D100X speakers can be connected with a USB mass storage device, USB
stick and USB flash player to play audio from via the speakers.​
•
Insert the USB device into the USB port at the back of the main speaker
(Ref.10).​
•
Press the 'Input/Volume' button on the main speaker (Ref.3) or the 'Source'
button on the remote control (Rem.22) repeatedly to change the speaker's
mode to USB Mode. A voice message will be heard announcing the mode.​
The stored audio files on the USB device will automatically start playing.​
•
PLEASE NOTE: The USB playback port can be used with an USB stick/drive type 2.0,
of up to 2T size. The audio formats supported are MP3.

USB Port Usage

EN
11