Connecting Cables And Ac Adapter; Connecting The Interface Cable - Fujitsu FP-410 Handbuch

3. Connecting Cables and AC Adapter

To connect or disconnect these cables, turn off the power
switches of the printer and all the devices to be connected to the
printer, and then unplug the plug of the AC adapter power cable
from the electrical outlet.
Note:
Interface cable and cable for AC Adapter is not included in the box.
Please buy them when you need.

3-1. Connecting the Interface Cable

Remove the connector cover at the rear of the printer. And
connect the interface cable to the rear connector.
Note:
Remove notch of connector cover with Nipper, to maintain the space for
the cable of interface cable. Otherwise, it would cause the failure
because of cable broken.
Connector cover
Serial interface cable
* After connecting the
cable, secure it with
the two screws.
Parallel interface cable
*After connecting the
cable, secure it with
the clips.
7