Herunterladen Inhalt Inhalt Diese Seite drucken

Fujitsu FP-410 Handbuch Seite 15

Thermal printer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

(4) Place the paper in the correct orientation, and carefully close the
top cover.
Notes:
1. Place the paper in the correct orientation. If the top cover is
closed while the paper is not correctly in place, a paper jam or
misaligned printing might occur.
2. To close the top cover, push the center (see arrow below) of
the cover until it locks securely. If the cover is locked but the
cover open lever is pressed down, the cover is not completely
locked. In this case, press the top cover again. If the cover is
not completely locked, printing might be impossible.
3. If the ERROR lamp is lit, print commands cannot be accepted.
Be sure the top cover is securely locked.
Top cover
Cover open lever
(5) Cut the leading edge of the paper by entering a cut command, etc.
14

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis