Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Note:
If connecting this product to a Windows PC via the serial interface, do
not select "DSR(#6)RESET: ENABLE ."
If "Valid" is selected, this product might not operate even if the printer
power is turned on. In this case, turn off the power, disconnect the
interface cable from the printer, turn the power back on, and select
"DSR(#6)RESET: DISABLE" in setup mode.
"DSR(#6)RESET: ENABLE" is supplied only for special specifications.
(2) CUSTOMIZE VALUE setup items
No.
Item
1
USER NV
MEMORY
2
NV GRAPHIC
MEMORY
3
PRINT WIDTH
4
PRINT DENSITY
5
PRINT COLOR
6
RETURN TO UP
7
RETURN TO
SETUP MENU
(3) SERIAL INTERFACE CONDITION setup items
No.
Item
1
BAUDRATE
2
FORMAT
3
PROTOCOL
4
RETURN TO UP
5
RETURN TO
SETUP MENU
Explanation
-Capacity of the user NV
memory
-Capacity of the NV graphic
memory
-Width of paper
-Print density
-Print colors
-The color specification
command is invalid unless
"Dual-tone" is specified for this
item.
-Returns to the selection mode
for the setup group items.
-Returns to the setup menu.
Explanation
-Baud rate
-Data format
-Buffer control protocol
-Returns to the selection mode
for the setup group items.
-Returns to the setup mode.
58
Detail setup item
1KBYTE 64KBYTE,
128KBYTE 192KBYTE
None 64KBYTE 128KBYTE
192KBYTE 256KBYTE
320KBYTE 384KBYTE
58mm
80mm
70% 75% 80% 85% 90%
95% 100% 105% 110%
115% 120% 125% 130%
MONO
TWO
Detail setup item
2400BPS 4800BPS
9600BPS 19200BPS
38400BPS 57600BPS
7EVEN1 7ODD1
8NONE1 8EVEN1
8ODD1
XON/XOFF
DSR/DTR
Werbung
Kapitel
Inhaltsverzeichnis
