Fujitsu FP-410 Handbuch Seite 60

(4) OTHER setup items
No. Item
1 BATCH
PRINTING
2 FONT SIZE
3 PRINT COLUMN
(58mm)
4 PRINT COLUMN
(80mm)
5 ACK PULSE
WIDTH
6 CUTTER
PRESSURE
7 BM SENSOR
8 RETURN TO UP
9 RETURN TO
SETUP MENU
Address your comments and inquiries on this manual to:
FUJITSU ISOTEC LIMITED
135 Higashinozaki Hobara-Machi Date-gun, Fukushima JAPAN
TEL: (81-24)574-2224
FAX: (81-24)574-2244
Explanation
-Specifies batched printing mode.
-Specifies font to be used.
-Specifies size of kanji font and
alphanumeric/kanji font.
-Specifies number of columns to be
printed.
-This item is only valid if the paper
width is 58 mm.
-Specifies the number of columns to be
printed.
-This item is only valid if the paper
width is 80 mm.
-Specifies the ACK pulse width.
-This item is valid only for the Parallel
interface.
-Specifies the force of the paper cutter
based on paper weight.
-Specifies whether the black mark
sensor is mounted.
-Specify "Yes" only if the black mark
sensor is mounted.
-Returns to the selection mode for the
setup group items.
-Returns to the setup mode menu.
59
Detail setup
item
ENABLE
DISABLE
22×22
24×24
35COLUMN
32 COLUMN
48COLUMN
42COLUMN
1µs
8µs
NORMAL
THICK PAPER
INSTALLED
UNINSTALL