Fujitsu FP-410 Handbuch Seite 42

A-2. Cutter Specifications
Cutting method: Partial cut (A portion of the paper is not cut).
Note: Full-cut mode is not supported.
A-3. Specifications of Paper Supply
(1) Supply method: Manual placement
(2) Paper near-end: Detection of paper near end.
A-4. Specifications of Interfaces
(1) RS-232C
(2) Conforms to IEEE1284
(3) USB
A-5. Specifications of Environmental Conditions
(1) Temperature
Operating:
Standby:
Storage(When packed): -20ºC to 60ºC
(2) Humidity
Operating:
Standby:
Storage (When packed): 5% to 95% RH
Note: No Condensation
(3) Maximum wet-bulb temperature: 29ºC or less
5ºC to 40ºC
-5ºC to 60ºC
10% to 85%RH
8% to 95% RH
41