Troubleshooting - Lord R12 2.Gn Bedienungsanleitung

TROUBLESHOOTING

Caution! Before troubleshooting, disconnect the power supply. Only a qualified
electrician of competent person must do the troubleshooting that is not in this
manual.
Important! There are some sounds during normal use (compressor, refrigerant
circulation).
Problem
Appliance does not
work
The food is too warm.
Appliance cools too
much
Possible cause
Appliance is turned off.
Mains plug is not plugged in
or is loose
Fuse has blown or is
defective
Socket is defective
Temperature is not properly
adjusted.
Door was open for an
extended period.
A large quantity of warm
food was placed in the
appliance within the last 24
hours.
The appliance is near a heat
source.
Temperature is set too cold.
Solution
Press "Adjust" button for
5 seconds to turn on the
appliance.
Insert mains plug.
Check fuse, replace if
necessary.
Mains malfunctions are to be
corrected by an electrician.
Please look in the initial
Temperature Setting section.
Open the door only as long as
necessary.
Turn the temperature
regulation to a colder setting
temporarily.
Please look in the installation
location section.
Turn the temperature
regulation knob to a warmer
setting temporarily.
25