Installation; Service - Lord R12 2.Gn Bedienungsanleitung

Installation

Important! For electrical connect ion carefully follow the
instructions given in specific paragraphs.
• Unpack the appliance and check if there are damages on it.
Do not connect the appliance if it is damaged. Report possible
damages immediately to the place you bought it. In that case
retain packing.
• It is advisable to wait at least four hours before connecting the
appliance to allow the oil to flow back in the compressor.
• Adequate air circulation should be around the appliance, lacking
this leads to overheating. To achieve sufficient ventilation follow
the instructions relevant to installation.
• Wherever possible the spacers of the product should be against
a wall to avoid touching or catching warm parts (compressor,
con-denser) to prevent possible burn.
• The appliance must not be located close to radiators or cookers.
• Make sure that the mains plug is accessible after the installation
oft he appliance.

Service

• Any electrical work required to do the servicing of the appliance
should be carried out by a qualified electrician or competent
person.
• This product must be serviced by an authorized Service Center,
and only genuine spare part s must be used.
9