HOMCOM 820-421V90 Bedienungsanleitung Seite 7

Operation
1.Turn on:
Plug in the heater. After "BI" voice, the heater enter into standby mode and show ++
icon on display. Press ++
desired temperature.
Factory default state:
Free mode, temperature setting 22°C
Day: 1(Monday); Time: 00:00(hour : minute)
Open window function: Off
Timer: Off
2.Week and time setting
Please note you must set week and time at the first using. Please follow below steps
to set:
Press and hold ++ button 3 seconds, display show + and flash.
Press ++ or ++
Press ++ or ++
Press ++ to confirm day setting and enter time setting, display show
Press ++ or ++
Press ++ to confirm hour setting and enter minute setting, display show ++ and
flash.
Press ++ or ++ button to set minute
Press ++ button to confirm all settings.
Remarks: the week and time will be reset to factory default setting if the power supply
cut off. The other settings will keep the same as last settings before power supply
cutting. So in order to keep your heater running correctly, please reset the week and
time if power supply cut off.
3.Heatingmode
4modes:Free mode(Fr),Weeklyprogram(P1),Weeklyprogram(P2),Anti-
frostmode(AF)
Press ++ button to select running mode: Fr→P1→P2→AF→Fr
Free mode: Temperature set 5~35°C by pressing ++ or ++ button.
Weekly program:
Please note if week and time setting are not finished, when the first time enter P1/P2
mode, it is requested to set week and time first.
P1:The program can't be modified.
If enter P1 mode, every day will run default setting as below.
P2:The program can be modified. Default setting as below.
button to turn on the heater, and display show the
button, display show (Monday) and flash.
button to select from 1 to 7(MondaytoSunday)
button to set hour
6
and flash.