Handling The Battery - Denver E200 Rm Benutzerhandbuch

•
4: Speed unit. Choose to display the speed in "Km/h" or "MPH" using the "+" and "-" buttons.
Then press SET to return to setting 0.
Hold down the SET button for 3 seconds to save and exit the setting menu. To exit without saving your
changes, press the ON/OFF button for 3 seconds to turn off the display.

Handling the battery

Reading the level of charge on the battery
To find out your charge level, press the charge button located on the top of your battery once.
The 5 LEDs light up to indicate the level of charge and then go off after 4 seconds.
DISPLAY
● ● ● ● ●
● ● ● ● ◌
● ● ● ◌ ◌
● ● ◌ ◌ ◌
● ◌ ◌ ◌ ◌
Switching the battery on / off
To turn on your battery, press the red ON/OFF button at the back on the bottom of the battery. Press
it again to switch it off. When your battery is off it no longer provides power to your bicycle however
the battery charge display remains functional.
CHARGE LEVEL
84
100%
80%
60%
40%
< 20%