Denver E200 RM Benutzerhandbuch Seite 78

When the luggage rack is loaded, the bearing of your bicycle changes.
Spread the luggage load equally on both sides to help keep your bicycle stable. All luggage must be
firmly secured to the luggage rack, before each use it is important to check that nothing is left hanging
over an edge which may become caught in the rear wheel of the bicycle. Do not adjust the rack
arbitrarily, please consult your dealer for adjustment if necessary. Do not modify the luggage rack, any
modification of the rack by the user leads to the invalidity of this user guide. The luggage should not
obscure your bicycle's the reflectors and lights.
Kickstand
Before using the bicycle, make sure that the kickstand is definitely folded up.
Maintenance
Your bicycle requires regular maintenance, not only for your safety but also to prolong its useful life.
It is important to periodically check the mechanical elements in order to replace worn-out components
or components showing signs of wear if necessary.
When replacing components, it is important to use original brand parts in order to preserve the
bicycle's performance and reliability. Make sure to use appropriate spare parts when it comes to the
tyres, inner tubes, gear system components and the various brake system components.
It is the responsibility of the user to use different parts of the original parts.
WARNINGS: Always remove the battery before performing any maintenance.
Cleaning
In order to avoid corrosion on the bicycle, it should be rinsed in fresh water after every use, especially
if it has been exposed to sea air.
It should be cleaned with a sponge, a bowl of warm soapy water and a hosepipe (without pressure).
RECOMMENDATION: Be particularly careful to not use a pressurised water jet.
78