Operation and display of the switch lock
Locking the power switch
Press and hold the power switch for longer than 2
seconds�
• The lock mode can only be activated when the power is off.
Release the power switch after about 2 seconds from
when the indicator light (white) lights up. The indicator light
(white) will blink and turn off after 5 seconds.
The power switch is locked
► Checking if the power switch is locked�
Press and then release the power switch in the locked
state. The indicator light (white) will blink and turn off after
5 seconds.
Unlocking the power switch
Press and hold the power switch for longer than 2
seconds in the locked state�
• Release the power switch once the indicator light (white)
lights up after blinking for about 2 seconds.
• The power switch is unlocked
(The shaver starts operating.)
► Notes
• The power switch cannot be unlocked while the shaver is being charged.
Cleaning
• It is recommended to clean the shaver after each use.
• Check that the socket cover is closed.
1. Apply a small amount of hand soap and water on the
system outer foil.
• Ensure the cleaning shutter is closed.
2� Turn the shaver on�
14