Connecting To Speaker Output Terminals Of The Amplifier - Yamaha NS-SW1000 Bedienungsanleitung

n
Example: Connecting the subwoofer to an amplifier that features one set of speaker output terminals
Use speaker cables to connect the speaker output terminals of the amplifier to the subwoofer's INPUT 1 (FROM AMPLIFIER) terminals. Connect the front speakers to the subwoofer's
OUTPUT (TO SPEAKERS) terminals. Although the subwoofer is connected between the front speakers and the amplifier, the sound volume or quality will not be affected.
Connecting one subwoofer
Right front
speaker
Amplifier or
receiver
Subwoofer
n
Example: Connecting the subwoofer to an amplifier featuring two sets of speaker output terminals (A and B) that can output sound signals
simultaneously
Set the amplifier so that both sets of speaker output terminals (A and B) will output sound signals simultaneously. Then, connect the front speakers to terminals A, and connect the
subwoofer to terminals B.
Note
If your amplifier features two sets of speaker output terminals that do NOT output sound signals simultaneously, please refer to the example for connecting an amplifier that has only one set of
speaker output terminals (see the figure above).

Connecting to speaker output terminals of the amplifier

2
Left front
speaker
Speaker output
terminals
Connecting two subwoofers
Right front
speaker
Amplifier or
receiver
Subwoofer
Left front
speaker
Speaker output
terminals
Subwoofer
6
En