Rear Panel - Yamaha r-s700 Bedienungsanleitung

Rear panel

1 GND terminal
Used to connect a turntable (see page 10).
2 TAPE jacks
Used to connect a tape deck (see page 10).
3 Antenna terminals
Used to connect FM and AM antennas (see page 12).
4 DOCK jack
Used to connect an optional Yamaha Universal Dock for
iPod (such as the YDS-12), Wireless System for iPod
(YID-W10), or Bluetooth Wireless Audio Receiver
(YBA-10) (see page 27).
5 PHONO jacks
Used to connect a turntable (see page 10).
6 CD jacks
Used to connect a CD player (see page 10).
7 LINE 1-3 jacks
Used to connect audio components (see page 10).
8 iPod VIDEO output jack (R-S700 only)
Used to send iPhone/iPod video content to a video
monitor, such as a TV (see page 27).
Note
Video content output is possible only when an iPhone/iPod is
connected this unit using a Universal Dock for iPod (such as the
YDS-12).
9 COUPLER jacks (R-S700 only)
Used to connect an external unit (see page 13).
0 SUBWOOFER OUT jack
Used to connect a subwoofer with built-in amplifier (see
page 10).
(R-S700)
A POWER MANAGEMENT switch
Used to enable or disable the automatic power down
function. When this function is enabled, this unit
automatically enters standby mode if it is not operated for
a certain amount of time (3 settings are available; see page
34).
B SPEAKERS terminals
Used to connect speakers (see page 10).
C IMPEDANCE SELECTOR switch
Used to select the impedance setting (see page 11).
D AC IN (R-S700 only)
Used to plug in the supplied power cable (see page 13).
CONTROLS AND FUNCTIONS
CONTROLS AND FUNCTIONS
7
En