THOMSON RT850DABBT Bedienungsanleitung Seite 26

Manual search
Press the ▲ or ▼ buttons to select "Manual tune", then press the ▶/Enter button to
1. Press the "Menu" button on the device to access the DAB settings.
2.
Press ▲ or ▼ to set the required station. The graph will show the signal strength.
access the service menu.
3.
4. Press MENU to exit the search function.
5. If no stations are found, make sure that the aerial is fully extended and test the signal by
carrying out another automatic search in a different location.
DRC (Dynamic Range Control) function
The DRC (Dynamic Range Control) function is a technology used to enhance quite sounds
In DAB mode, press the ▲ or ▼ button to select "DRC". Press the ▶/Enter button to
in a noisy environment.
1.
confirm. A "*" will be displayed in the top-right corner of the screen.
"DRC off": The DRC function is disabled, DRC will not be taken into account.
"DRC low": The DRC level is set to half the output level.
"DRC high": The DRC level corresponds exactly to the output level.
In DAB mode, press ▲ or ▼ to display the "Prune" sub-menu. Press the ▶/Enter button to
Deleting stations that are no longer available from the list
select the "Prune" option.
In DAB mode, press < or > to display the "System " sub-menu. Press the ▶/Enter button to
System (DAB)
access the system settings sub-menu.
- EN 26 -