Optional Accessories - Pce Instruments Pce-Ct 100 Bedienungsanleitung

2.3

Optional accessories

The following probes can be connected to the gauge PCE-CT 100:
Probe
PCE-CT 100 FN1.5
PCE-CT 100 F1.5
PCE-CT 100 N1.5
PCE-CT 100 FN1.5/90° 0 ... 1500 µm
PCE-CT 100 FN1.5R
PCE-CT 100 F1.5R
PCE-CT 100 FN0.2
PCE-CT 100 FN3.5
PCE-CT 100 F3.5
Range Application
dual probe
measurements on
0 ... 1500 µm steel/iron and on
non-ferrous
metals
for measurements
0 ... 1500 µm
on steel/iron
for measurements
0 ... 1500 µm on
metals
angled dual probe
for measurements
on steel/iron and
on
metals in tubes or
grooves
angled dual probe
for
ments
0 ... 1500 µm
steel/iron and on
non-ferrous
metals
angled probe for
0 ... 1500 µm measure-ments
on steel/iron
high-precision
combination
probe
0 ... 200 µm layers
steel/iron and on
non-ferrous
metals
angled dual probe
for
ments
F: 0 ... 3.5 mm
steel/iron and on
N: 0 ... 3.0mm
non-ferrous
metals
extended range
angled probe for
measurements on
0 ... 3.5 mm steel/iron
extended
range
© PCE Instruments
33
Accuracy
(referred to PCE standards)
1
works calibration
2
1-point calibration
3
2-point calibration
1
for
 3 µm or 3 % of reading;
whichever is greater
2
(1 µm + 2 % of reading)
3
(1 µm + 1 % of reading)
as FN1.5
non-ferrous as FN1.5
as FN1.5
non-ferrous
measure-
on
as FN1.5
as FN1.5
1
 2,5 µm or 2,5 % of
reading;
for thin
whichever is greater
on
2
(0,7 µm + 1,5 % of
reading)
3
(0,7 µm + 1 % of reading)
1
 5 µm or 3 % of reading;
measure-
whichever is greater
on
2
(2 µm + 2 % of reading)
3
(2 µm + 1 % of reading)
with
with as FN3.5