Startup And Operation; Startup; Operation; Operating Notes - Balluff Bos R072K-U-Rd10 Serie Betriebsanleitung

BOS R072K-_U-_D10-...
Optoelectronic sensors − diffuse sensor
6

Startup and operation

6.1

Startup

DANGER
Uncontrolled system movement
When starting up, if the sensor is part of a closed loop
system whose parameters have not yet been set, the
system may perform uncontrolled movements. This could
result in personal injury and equipment damage.
► Persons must keep away from the system's
hazardous zones.
► Startup must be performed only by trained technical
personnel.
► Observe the safety instructions of the equipment or
system manufacturer.
CAUTION
Red light / infrared light
If you look into the beam emitted by the transmitter,
temporary blinding and irritation of the eyes is possible.
The use of operating elements or the implementation of
settings or processes which are not described in this
user's guide may cause dangerous radiation exposure.
► Do not look into the beam or transmitter!
► Take specifications in this user's guide into
consideration.
No other protective measures are required for
operation (Exempt Group per IEC 62471:2006).
1. Check connections for tightness and correct polarity.
Replace damaged connections.
2. Turn on the system.
3. Check measured values and adjustable parameters
and readjust the sensor if necessary. Check spacing
over the entire measuring range.
Check for the correct values, especially after
replacing the BOS or after repair by the
manufacturer.
www.balluff.com
6.2

Operation

CAUTION
Red light / infrared light
If you look into the beam emitted by the transmitter,
temporary blinding and irritation of the eyes is possible.
The use of operating elements or the implementation of
settings or processes which are not described in this
user's guide may cause dangerous radiation exposure.
► Do not look into the beam or transmitter!
► Take specifications in this user's guide into
consideration.
No other protective measures are required for
operation (Exempt Group per IEC 62471:2006).
6.3

Operating notes

– Regularly check function of the sensor and all
associated components
– Take the sensor out of service whenever there is a
malfunction
– Secure the system against unauthorized use
– Check fastening and retighten if required
6.4

Cleaning

Keep the lens as free from soiling as possible (dust, etc.)
and do not touch it (fingerprints).
Remove soiling:
► Wipe the lens with a soft, lint-free cloth dampened with
water.
6.5

Maintenance

The product is maintenance-free.
english 9