About This Guide; Applicable Documents; Symbols And Conventions; Explanation Of The Warnings - Balluff Bos R072K-U-Rd10 Serie Betriebsanleitung

BOS R072K-_U-_D10-...
Optoelectronic sensors − diffuse sensor
1

About this guide

1.1 Scope
This guide provides all information required for safe use of
the BOS R072K-_U-_D10-... sensor.
It applies to the following types (see Type code on
page 14):
– BOS R072K-_U-RD10-...
– BOS R072K-_U-ID10-...
Read this guide and the applicable documents before
installing and operating the product.
Original user's guide
This guide was created in German. Other language
versions are translations of this guide.
© Copyright 2025, Balluff GmbH
All content is protected by copyright. All rights reserved,
including the right to reproduce, publish, edit and translate
this document.
1.2

Applicable documents

Additional information about this product can be found at
www.balluff.com on the product page, e.g. in the
following documents:
– Data sheet
– Declaration of Conformity
– Disposal
1.3

Symbols and conventions

Individual instructions are indicated by a preceding
triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Numbers unless otherwise indicated are decimals (e.g.
23). Hexadecimal numbers are represented with a
preceding 0x (e.g. 0x12AB).
Note, tip
This symbol indicates general notes.
4 english
1.4

Explanation of the warnings

Always observe the warnings in this guide and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of hazard
Consequences if not complied with
► Measures to avoid hazards
The individual signal words mean:
CAUTION
The general warning symbol together with the signal
word CAUTION indicates a hazard which can lead to
slight or moderate injuries.
DANGER
The general warning symbol together with the signal
word DANGER identifies a hazard, which, if not avoided,
will certainly result in death or serious injury.