Charging Indicator - Razer Pro Click Bedienungsanleitung

CHARGING INDICATOR

While plugged in, the Razer Pro Click's status indicator will display its current battery
level (as shown below).
Battery level
<25%
26-50% Yellow
51-75% Orange
76-99% Green
100% Green
LOW POWER INDICATOR
The Razer Pro Click 's status indicator will blink red twice in repeated intervals to
indicate that the battery's power is less than 5%. This lighting sequence will repeat
until the battery is drained or the mouse is connected to the PC via the charging cable.
The indicator percentage can be customized using Razer software.

You can also check the Razer Pro Click's battery level by moving the slider switch from
power off to either Bluetooth or 2.4Ghz mode. The status indicator will light up in the
color according to the mouse's current power level (as shown below).
Battery level
<25%
26-50% Orange
51-75% Yellow
76-100% Green
Color Effect
Red Breathing
Breathing
Breathing
Breathing
Static
Color
Red
CONNECTING THE RAZER PRO CLICK VIA 2.4 GHZ MODE
1. Remove the compartment cover of the Razer Pro Click and pull out the
wireless USB dongle.
2. Close the compartment cover and connect the wireless USB dongle to the USB port
of your computer.
3. Switch the slider to 2.4 GHz mode. The pairing indicator will start blinking rapidly.
2.4