First Use - Welltec Probot Rx3 Pro Bedienungsanleitung

First use

1. Firmly attach the safety rope 2. Screw fully the other end of
on the carabiner side to an the safety rope into the rope's
socket on the robot.
immovable solid object.
4. Attach the cleaning cloth to 5. Use tank filling bottle to pour
the velcro on the underside of good quality glass cleaner into
the robot in a way so it adjoins both tanks. Do not exceed the
" "
snugly to the device and doesn't Max line.
cover sensors.
www.Welltec.pro
3. Ensure that the screw of the
safety rope is properly and fully
tightened in the robot's socket.
6. Connect the power adapter
to the extension cord and rotate
the extension cord end in about
90° to lock up their connection.
38
First use
7. Connect power cord to the 8. Plug the other side of the
power adapter extension cord into the robot's
socket and screw in fully the nut
on its end.
10. Plug the power cord into 11. Turn on the robot by long
the power socket and wait until pressing the power button.
the battery is fully charged. e Make sure that the air on the
LED indicator will turn green. underside of the robot is sucked
When using the device for the in.
first time, it can take 3-5 hours.
www.Welltec.pro
9. Ensure that the power
adapter and other cords are
firmly connected.
12. Place robot on the chosen
surface. Do not let go of the
device until you ensure that it is
sucked onto the glass.
Short-press the power button
to start cleaning.
39