WELLTEC PROBOT RX3 Pro Bedienungsanleitung Seite 26

Connection to the application
e first connection
Before starting the connection, make sure
that the phone is connected to a 2.4GHz
WiFi network with an active Internet
connection. Have a password for this
network ready.
Plug in the device. When the machine
enters the stand by state, quickly press the
power button three times. There should
be a voice prompt "Network connection
configuration" and power indicator should
flash green.
www.Welltec.pro
Adding a device
1. On the main screen of 2. The application
the application, select requires access to the
the + button from the phone's location to work
right corner of the screen properly. Please
Add Device access with the Continue
or the
button. button to continue.
48
Connection to the application
Adding a device
3. Select Small Home
Appliances from the list
on the left and then
allow locate Window Cleaner
(WiFi) on the list.
4. Enter the password for 5. Skip the device reset
your WiFi network and instructions from
select Next. If you want Tuya app by pressing
Next 3 times.
to connect to a different
network, select the
button.
www.Welltec.pro 49
6. Select EZ Mode to
the start connecting with the
robot .