First Use - Welltec Probot Rx11 Pro Bedienungsanleitung

First use

1. 2.
Firmly attach the safety rope Place the cleaning cloths on
on the carabiner side to an the holders so that they fit
immovable solid object. tightly to the device.
4.
Connect the power adapter
to the extension cord and rotate
the extension cord end in about
90° to lock up their connection.
www.Welltec.pro
3.
Use a tank refilling bottle to
pour a good quality glass
cleaner into the tank. Do not
exceed the "Max" line.
36
First use
5. 6.
Connect power cord to the Plug the power cord into the
power adapter. power socket and wait until the
battery is fully charged.
indicator will turn green. When
using the device for the first
time, it can take 3-5 hours.
8.
Place robot on the chosen
surface. Do not let go of the
device until you ensure that it is
sucked onto the glass.
Short-press the power button
to start cleaning.
www.Welltec.pro
7.
Turn on the robot by long
pressing the power button.
e LED Make sure that the air on the
underside of the robot is sucked
in.
37