Herunterladen Diese Seite drucken

Icy Box IB-RD3720-CU3 Handbuch Seite 16

Raid-system für 2.5/3.5 sata hdd/ssd
Verfügbare Sprachen

Verfügbare Sprachen

Notes
3. This product is compatible with 2.5"/3.5" mechanical hard disks and solid state disks with stan-
dard SATA interface.
4. Install HDD 1 and HDD 2 disks correctly.
5. Please only use the original power adapter. Using other non-certified power adapters may
damage the device or cause safety hazards.
6. When a new hard disk is used for the first time, it must be initialized and formatted before the
computer can recognize it.
7.
After the disk array is set up, it must be initialized and formatted before the computer can recog-
nize it.
8. For optimal performance, it is recommended that you connect this device to a USB 3.2 Gen 1 or
above port.
9. Adjust the DlP switches based on user requirements.
10. To maintain optimal temperature control, the device's built-in cooling fan operates in high-speed
mode during periods of high load. This can lead to increased fan noise,especiallyin quiet en-
vironments.
1 1. Please put the device in an environment with a stable temperature and constant humidity, avoid
direct sunlight or any liquids coming into contact with the device.
12. In the event of a thunderstorm or inconsistent voltage, power off the device and stop all use to
avoid potential damage.
13. Please power off the device before cleaning. When cleaning, use a moist cloth. Do not use che-
micals or spray cleaners.
14. Do not drop, squeeze, violently impact, or throw the device.
15. This device contains small parts and pieces, please keep it out of reach of children to prevent
choking due to unintended swallowing.
16. Do not dismantle or fix the device by yourself. lmproper disassembly and assembly may cause
electric shock or other safety hazards. lf repair or replacement parts and/or accessories are
required, please contact customer service.
Warnings
Please avoid use in high temperature, low temperature, wet, dusty and long-term exposure to sunlight.
Do not place the product in an environment with corrosive substances, and do not use chemical solu-
tions to clean the product.
Keep the product out of reach of children and do not allow children to use the product unsupervised.
Do not disassemble or repair the products and accessories without authorization.
Gently clean the product with a dry or moist cloth.
Manual IB-RD3720-CU3
loading