Intended Use; Explanation Of Symbols - Conrad 1302513 Bedienungsanleitung

3. Intended use

The LED light system is used to generate light effects in light show equipment, party rooms, etc. and is controlled by
the built-in controller or an external DMX controller.
This product is only approved for connection to 100 - 240 V / 50/60 Hz alternating voltage and only for use with an
earthed mains socket.
The DMX connections must only be connected to suitable DMX controllers or other DMX devices.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided
under all circumstances.
Any use other than that described above will damage this product and involves the risk of short circuit, fire, electric
shock, etc.
The entire product must not be modified or converted, and the casing must not be opened.
Observe all safety and assembly notes in these operating instructions!

4. Explanation of symbols

The symbol with a lightning bolt in a triangle is used where there is a health hazard, e.g. from electric
shock. The device contains no parts that require servicing by the user. Therefore, never open the device.
The exclamation mark indicates important notes in these operating instructions that must be strictly ob-
served.
This symbol on the device indicates that the user must read these operating instructions before using the
product and observe them during operation.
☞
The "hand" symbol indicates special information and advice on operating the device.
This symbol with the house informs the user that the device must only be used in enclosed rooms.
21