Herunterladen Inhalt Inhalt Diese Seite drucken

Care And Maintenance; Maintenance Schedule; Maintenance Works; Frost Protection - Kärcher BR 30/4 C Bp Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für BR 30/4 C Bp:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Care and maintenance

WARNING
Risk of injury if the machine is left running
in an unattended state.
Turn the appliance off and remove the ac-
cumulator prior to performing any tasks on
the appliance.
ATTENTION
Risk of damage to the device on account of
water leakage. Empty the waste water tank
and the fresh water tank prior to performing
maintenance tasks on the device.

Maintenance schedule

After the work
ATTENTION
Risk of damage. Do not sluice the appli-
ance with water and do not use aggressive
detergents.
 Empty the waste water tank.
 Clean the seals between the waste wa-
ter tank and the appliance.
 Empty the fresh water reservoir.
 Rinse the appliance: Fill the fresh water
reservoir with clear water (without de-
tergent) and let the appliance run for
one minute with the brush water supply
turned on.
 Empty the fresh water reservoir.
 Clean the outside of the appliance with
a damp cloth which has been soaked in
mild detergent.
 Clean the vacuum bar, check for wear
and replace if required (see "Mainte-
nance tasks").
 Check the brush for wear and replace if
required (see "Maintenance tasks").
Yearly
 Have the prescribed safety inspection
carried out by an electrician.

Maintenance Works

Replace the vacuum bar.
Note:
The vacuum bars are attached to the appli-
ance with snaps and can simply be pulled
off.
 Move the suction bar lift pedal to posi-
tion „suction off" (Fig. 4 - position "1/
ON", see inside front cover).
 Remove the fresh water reservoir.
 Remove the waste water tank.
 Lay the device on the reverse.
 Pull off the vacuum bar downwards.
 Insert the new vacuum bars and lock
them into place.
Replacing the brush roller
 Remove the fresh water reservoir.
 Remove the waste water tank.
 Lay the device on the reverse.
 Press the release button for the brush
roller and swivel the brush roller toward
the bottom and pull it off the driver.
 Place the new brush roller on the driver
and lock into place on the opposite side.

Frost protection

In case of danger of frost:
 Empty the fresh and dirt water reser-
voirs.
 Store the appliance in a frost-protected
room.
WARNING
Risk of injury if the machine is left running
in an unattended state.
Turn the appliance off and remove the bat-
tery before carrying out any tasks on the
machine.
ATTENTION
Risk of damage to the device on account of
water leakage. Empty the waste water tank
and the fresh water tank prior to performing
maintenance tasks on the device.
In case of faults that cannot be remedied
using the table below please contact the
customer service.
– 5
EN

Faults

15

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis