Technical Data - Meec Tools Rf601As Gebrauchsanleitung

Risks during atomisation and spraying
Toxic fumes are produced when spraying
•
specific materials, which can be harmful.
Ensure good ventilation during use.
-
Always wear safety glasses, gloves,
-
respiratory protection, etc., to prevent
the risk of personal injury caused by
inhalation of toxic fumes or
solvents/paint in contact with the skin or
eyes.
The noise level specified in the technical data
•
was measured 1.0 m behind the spray gun's
tip, 1.6 m above the floor.
Wear ear protection, if required.
-
Other risks
Never modify the product in any way.
•
Never enter the work area for active robots, machines, conveyors or the like.
•
Never spray foods or chemicals with the spray gun.
•
IMPORTANT: The product must only be used by persons who have had proper training. Check
that the product has not been damaged during transportation. Only use clean, dry air.
Connect the air hose to the air coupling.
•
The paint container or paint hose must be connected firmly to the paint connection.
•
Rinse the spray gun's paint ducts using an appropriate solvent.
•
Pour paint into the paint container, test spray and adjust the outgoing paint flow and
•
pattern width.

TECHNICAL DATA

Max. Operating
pressure
Noise level
Temperature
Feeding
Volume
Operating pressure
Air flow
Air cap, diameter
ENGLISH
6 bar
74.8 dB(A)
5–40°C
Suction
1000 ml
2-3 bar
410 l/min
4.6 mm
25